System Description
Begins with an application of UCoat epoxy. A modified, two-component, water based, high-performance epoxy coating that exhibits performance characteristics rivaling solvent-based products. Suitable for commercial, industrial or residential use, UCoat offers exceptional chemical resistance, abrasion resistance, and superior adhesion properties.

Following the UCoat application, UFlek-AF includes a broadcast of colored decorative vinyl flake sealed with our UGloss-AF chemical-resistant, high-gloss, solvent-based urethane top coat. Specially formulated for use on floors where vehicles, equipment, heavy traffic and frequent exposure to chemicals are present. The UFlek-AF system provides additional durability, resistance to wear and tear, UV stability and increased light reflection. The added element of the UFlek colored flakes is not only for decorative purposes, but can create a visual pattern which helps to disguise surface marks and imperfections within the substrate.

How Applied
UCoat epoxy is applied with a 1/2" nap roller and brush in two coats: the bond coat and the finish coat. The bond coat is applied directly to a dampened, prepared concrete surface. If an anti-slip surface is desired, UTex anti-slip aggregate is broadcast by hand on top of the bond coat while it is still tacky. The UCoat finish coat is applied after the bond coat is dry to the touch (4-6 hrs @ 68°F/20°C), and within 72 hours. UFlek vinyl flakes are broadcast on top of the tacky UCoat finish coat while it is still wet. The UGloss-AF clear top coat is applied after the UCoat finish coat is dry to the touch (4-6 hrs @ 68°F/20°C), and within 36 hours.

Ideal Uses
The UCoat with UFlek-AF is ideal for use in many types of applications and it is our second most widely used floor coating system for commercial and industrial applications. Suitable for interior and exterior applications such as:

Commercial/Industrial uses	Residential uses
Service Areas / Body Shops	Garage / Porches
Public / Employee Areas	Basements / Utility Rooms
Warehouse / Distribution Areas	Kitchens / Bathrooms
Manufacturing / Storage Facilities	Patios / Walkways / Enclosures

System Cost
Based on maximum coverage per gallon, the UCoat with UFlek-AF system starts as low as $0.84 sq.ft., or $484.90 for a 24' x 24' area (576 sq.ft.) of smooth concrete. Actual coverage will vary based on color used and surface porosity. Click here to use our Material Estimator to calculate the cost to coat your area and products needed.