System Description
Starts with an application of UCoat epoxy. A modified, two-component, water based, high-performance epoxy coating that exhibits performance characteristics rivaling solvent-based products. Suitable for commercial, industrial or residential use, UCoat offers exceptional chemical resistance, abrasion resistance, and superior adhesion properties.

After the UCoat application, UGloss-AF is applied for an extremely chemical-resistant, high-gloss, solvent-based urethane top coat. Specially formulated for use on floors where vehicles, equipment, heavy traffic and frequent exposure to chemicals are present. UGloss-AF provides additional durability, resistance to wear and tear, UV stability and increased light reflection. UGloss-AF Safety Colors are also commonly used for safety enhancements such as traffic striping and UGloss-AF clear is used to seal floor graphics (such as vinyl logos).

How Applied
UCoat epoxy is applied with a 1/2" nap roller and brush in two coats: the bond coat and the finish coat. The bond coat is applied directly to a dampened, prepared concrete surface. If an anti-slip surface is desired, UTex anti-slip aggregate is broadcast by hand on top of the bond coat while it is still tacky. The UCoat finish coat is applied after the bond coat is dry to the touch (4-6 hrs @ 68°F/20°C), and within 72 hours. The UGloss-AF top coat is applied after the UCoat finish coat is dry to the touch (4-6 hrs @ 68°F/20°C), and within 36 hours.

Ideal Uses
The UCoat with UGloss-AF is ideal for use in many types of applications, and is our most widely used floor coating system for commercial and industrial applications. Suitable for interior and exterior applications such as:

Commercial/Industrial uses	Residential uses
Automotive Body Shops	Garages / Porches
Service and Public / Employee Areas	Basements / Utility Rooms
Warehouses / Distribution Areas	Kitchens / Bathrooms
Manufacturing / Storage Facilities	Patios / Walkways / Enclosures

System Cost
Based on maximum coverage per gallon, the UCoat with UGloss-AF system starts as low as $0.80 sq.ft., or $459.90 for a 24' x 24' area (576 sq.ft.) of smooth concrete. Actual coverage will vary based on color used and surface porosity. Click here to use our Material Estimator to calculate the cost to coat your area and products needed.