System Description
UCoat is a modified, two-component, water based, high-performance epoxy coating that exhibits performance characteristics rivaling solvent-based products. Suitable for commercial, industrial or residential use, UCoat offers exceptional chemical resistance, abrasion resistance, and superior adhesion properties.

UGloss is a chemical resistant, high-gloss clear topcoat. Formulated for non-automotive floors, this water-based acrylic urethane exhibits abrasion resistance without the solvent odors associated with typical urethanes making it ideal for use in basements or other areas with limited ventilation.

How Applied
UCoat epoxy is applied with a 1/2" nap roller and brush in two coats: the Bond Coat and the Finish Coat. The Bond coat is applied directly to a dampened, prepared concrete surface. If an anti-slip surface is desired, UTex anti-slip aggregate is broadcast by hand on top of the bond coat while it is still tacky. The UCoat finish coat is applied after the bond coat is dry to the touch (4-6 hrs @ 68°F/20°C), and within 72 hours. The UGloss water based top coat is applied after the UCoat finish coat is dry to the touch (4-6 hrs @ 68°F/20°C), and within 36 hours.

Ideal Uses
The UCoat with UGloss (water based) is ideal for interior, non-automotive applications. Adding the UGloss top coat over the basic UCoat epoxy system provides additional durability, resistance to wear and tear, and increased light reflection. UGloss clear can also be used to seal floor graphics (such as vinyl logos) or decorative aggregates.

System Cost
Based on maximum coverage per gallon, the UCoat with UGloss system starts as low as $0.73 sq.ft., or $419.90 for a 24' x 24' area (576 sq.ft.) of smooth concrete. Actual coverage will vary based on color used and surface porosity. Click here to use our Material Estimator to calculate the cost to coat your area.