UCoat It will be debuting the UltraLife finish at SEMA as the featured floor for the West Coast Customs Experience '07 exhibit with more than 1,600 sq.ft. of the UltraLife finish on display! For more about the WCC Experience at SEMA, click here.

What is UltraLife?

UCoat It UltraLife is a multi-layered epoxy / urethane floor coating finish that exhibits exceptional hiding characteristics along with superior chemical and abrasion resistance. Suitable for automotive and exterior areas, UltraLife finishes can be applied on any properly prepared cement or wood surface and may even be used as an alternative to resurfacing on rough surfaces.

What is the process to apply an UltraLife finish?

1. On a damp-wet floor, UCoat commercial-grade epoxy is applied with roller and brush directly to the surface. The UCoat material will penetrate the surface and create a permanent bond with the cement.
2. After the UCoat Bond Coat is dry and tack-free (4-6 hrs.), a second coat of UCoat epoxy is applied. UFlek vinyl colored flakes are hand broadcast onto the UCoat finish coat as it is rolled out, applying the flakes as you go. After the first broadcast of flakes, approximately 40% of the floor will be covered with 60% of the underlying color showing through.
3. After the UCoat finish coat is dry and tack free (4-6 hrs.), UGloss-AF clear urethane is applied over the first layer of flakes. A second broadcast of flakes is applied as before, this time on top of the wet UGloss-AF clear as you roll it out. After this, the flakes should cover 80% or more of your floor with minimal amounts of the underlying color showing through.
4. To finish your UCoat It UltraLife floor, apply one or more coats of UGloss-AF clear after the previous coat is dry and tack-free. Apply UGloss-AF over the entire floor to seal in the flakes and create a high-gloss finish. One or more UGloss-AF clear top coats can be applied to obtain a higher-build, less-textured surface.

About UCoat It

UCoat It^® offers true, commercial-grade epoxy floor coating systems in several colors and decorative options to suit virtually any décor. UCoat It is perfect for garages, basements, patios, recreational rooms, pole barns, kennels, industrial areas and more — basically any place where a durable, protective finish is desired.

Best of all, UCoat It is designed for the do-it yourselfer! All UCoat It floor coating systems are packaged in user-friendly kits with the necessary tools and equipment to apply a commercial grade coating for a fraction of the cost of professional installation. Applied with a roller and brush directly to an easily prepared, wet concrete surface, the chemical properties of the materials cause it to react and harden not only on top of, but actually into the surface of the concrete producing a permanently bonded, plastic like finish. And best of all, all UCoat It finishes come with a Lifetime Warranty against lifting and peeling, including ”hot-tire pick-up”!

Visit www.UCoatIt.com for more information!

Do it once. Do it right. Do it yourself!